Mopar B E body Axle Pair Dodge 30sp 8 3/4 8.75 Dana 60 Green Brg studs assembled

Up for auction is a New PAIR of  B, Or E  body Axles.  25 % STRONGER than stock axles!!  1541 Steel.  A must have for a performance set up with increased HP and big tires!!  Supplier says that they are SFI  approved.   30 spline,,,same as stock splines. o.e.

4 1/2″  5-bolt pattern. .[correct B-Body length for your year & model, [AS LENGTHS VARY…CALL US.!.!.!],,,. ……….You may order “E” or “C” Body axles here,. Please  E Mail Or…..Call Us,.. ## Up Top By “Condition”

 INCLUDES     THE GREEN BRGS, & FLANGES,…ASSEMBLED, HERE,.. INCLUDING REGULAR STUDS,……

USA 1/2×20 RH wheel studs pressed in..$50 for 10 studs…CALL US FOR YOUR ORDER, OR MORE INFO….   OUR  Phone ##s below…

3″ long studs add..$20,.more.. for press type………………………..TOTAL……….$495

or…add ..$30 for 3″ Screw-in type, installed………………………………………Total $500.

LONGER DISC BRAKE STUDS AND 2″ LONG,………ADDS……..$25.00 / SET OF 10.

new H/D nuts 1/2 20rh with 13/16 hex……….$2.00 each

NEW INNER SEALS….$30.00 PAIR……………………not required with the New Green Bearings..OPTIONAL.!!

ALSO AVAILABLE THE TIMKEN A-7 BEARINGS/ W/REG studs ASSEMBLED…………………Total Pkg….$545…. OR  add for the 3″press or screw-in studs and the correct $$$$$.

I NEED THE YEAR MODEL TO GIVE YOU THE CORRECT  B-BODY LENGTH AXLE YOU NEED…..OR YOU CAN MEASURE THE O.A. LENGTH AND ADVISE ME.  1965 ARE 28.9″, ………… 66-67 ARE 28.8″,…… 68-69 ARE  29.25″….1970 ARE…29.28″….., 1971-73 ARE…… 30.67″…MEASURE THE OUTSIDE OF AXLE FLANGE TO END OF SPLINES ON THE ANGLE…    I HAVE ALL TYPES AND COMBINATIONS FOR 8.75 MOPAR REARS….CUSTOM BUILT TO YOUR ORDER,,,INDIVIDUALLY!!!!!    THIRD MEMBERS, BRAKES, COMPLETE DRUM TO DRUM UNITS [ready to bolt in!!]       

 PLEASE CHECK OUT MY OTHER AUCTIONS, AND STORE LISTINGS!!!!!

Just Click on the Red, or BLUE  Door for over 200+ Quaility MOPAR Items.

You can use the bigger 2 1/2″ or 3″ brakes..if you have the proper backing plates.

NOTE;   these axles, now can use either  the ball bearing type axle brgs., or use Timken tapered type,..add  $80/pr,……….. includes:  2 brg sets, 2 new flanges,[one is adjustable], and gaskets,

PLEASE ADVISE US OF YOUR NEEDS………….. Know the correct year tells me the original length also…. Call Us At: John (## at top of page,. By “Condition”)

UPDATES ON OTHER AXLES ARE NOW:

A-BODY AXLES ARE ON AUCTION # 160985258853 Assembled,………. or #1606461917869 axles only,..

B- BODY ASSEMBLED …#  160484322889

B & E & C BODY AXLES ARE ON AUCTION # 381034699285,…AXLES ONLY.